A buyer’s guide to bike racks

The rack arm is designed to keep your bicycle secure while the bus is in transit. Please allow passengers with bicycles that are leaving to remove their bikes before loading another. – Easy mounting of bikes through detachable bike arms with lockable – Thule AcuTight torque limiter knobs that click” when optimal torque is reached – Fully foldable for convenient mounting, handling, and storage – Wheel straps with adjustable pump buckles for fastening wheels. Now’s probably a good time to introduce bikerackexpert.com to you if you’re looking for the most popular bike racks on the market today.

Conventional two-wheeled bicycles are allowed on bike racks (wheels at least 41 cm 16 inches). The bicycle racks accommodate two bikes per bus and are available on a first-come-first-served basis. The style of bike rack you choose to purchase depends on how many bikes you would like to carry, the size of hitch receiver you have on your vehicle, and the style of bikes you are carrying (ie.

Hanging style bike racks carry your bike by hanging the bikes frame from a single arm or two arm system. In particular, you’ll find these on rack designs that hold the top tube, but rear mounted designs that lock the wheels can also benefit from built-in anti-sway tech. This provides both a secure hold as well as a very easy loading method – you can have the bike locked in and ready to go in just a couple of minutes.

Instead of being a base mounted (i.e. via the bike wheels) carrying rack, this model has an extended arm to which the bike tubes are attached. Bikes simply slot on about a foot of the ground, with a set of well-designed ratchet arms locking them easily into place. Easy to install, adjust and load this bike rack is designed with ease of use as one of its most important features.

Bike racks fit bikes with wheels at least 41 cm (16 inches). We carry cargo boxes and racks for bikes, skis, kayaks, canoes, and more from Thule , Yakima , SportRack , Inno , Kuat , Rhino-Rack , and Arvika Our rack technicians assemble and install all sorts of unique racks at our two store locations. Rubber straps used to secure bikes to Yakima hitch and strap racks manufactured prior to 2004.

Some people love to use a roof rack/hitch rack combo so that they can carry bikes and surfboards or bikes and a cargo box. Bike racks are located on the front of the bus and can accommodate two bicycles. Pros: Once the hitch is mounted, loading and unloading of the bikes is easy.

Pros: Put the rack on the roof and forget about it. Once you’ve mastered the wheel brace, you’ll have the bikes loaded and unloaded swiftly. If your vehicle has crossbars designed to accept racks, this is an excellent option for bike racks that can be left on indefinitely. Electric pedal assist bicycles are allowed on bus racks currently, given that their frame fits the bike rack and is not over 110 lbs.

Racks on the front of the buses can hold two bicycles on a first-come, first-served basis. Light, strong, and hecka secure, the Yakima LiteRider 3 aluminum hitch rack offers more cushion in the cradles, more zip in the strip, and an integrated lockable security cable to ensure that both bikes and riders can relax on the road. Now you can haul 2 bikes of any size, from stout BMX bikes to long cruisers and heavy DH bikes with no need for adapters thanks to Yakima’s HoldUp Hitch Rack.

Tilt the rack with bikes loaded for quick rear-of-vehicle access using the new easy to reach tilt lever and KickStart foot pedal. 1UP USA builds the most durable, hassle-free hitch-mounting and bike-loading racks you’ll find—anywhere. All racks are designed for compatibility with a variety of bike shapes and lock configurations.

Bike racks on community buses can only be used during daylight hours, because the bikes block the headlights. Starting May 1st, 2015, our entire fleet will be equipped with bike racks, each capable of holding two bicycles at a time. Used Tuf Rack Fits 1-1/4 hitch Holds 2 bikes Comes with locks, pins and straps 1 Holder has been damaged and repaired, still works great.

Before the bus arrives, prepare your bike for loading by removing any loose items, such as water bottle, pump, lock, etc. Most bicycles can be accommodated on the bike racks, however, some large or small bicycles may not fit. Secure the bike-rack wheel lock on your bike; note that bicycle locks and chains are not to be used to secure your bike.

Conventional bikes with a single seat and two wheels will fit in the bike rack. All Guelph Transit conventional buses are equipped with an easy-to-use bike rack on the front of the bus, which allows you to take your bike to school, to work, to the park or anywhere our buses can take you. Hitch bike carriers can carry from one to six bikes using your vehicle’s hitch receiver.

Racks For Cars carries Canada’s best selection of hitch bike racks from brands such as Thule, Yakima, Kuat, RockyMounts, Hollywood, Swagman, SportRack and more. It can also be harder to load these types of racks, especially with taller cars or heavier bikes. Carrying capacity of up to 4 bikes is very generous and, most impressive, it includes a hinge joint (like the Thule Bike Rake) that allows it to tilt forward for easy access to the trunk.

On the other hand, you do get potentially a lot more capacity here, with racks available to take 2, 4 or even 5 bikes. Your bike is loaded into the individual tie-down points that lock down onto the top tube to hold bikes securely in place during transport. Hitch bike racks for 1 to 5 bikes, including E-bikes.

Lift your bicycle onto the bike rack, fitting the tires into the wheel slots labeled for front and rear wheels. Remove or secure any loose items on your bicycle such as a water bottle or bike lock while you are waiting for the bus.

Leave a Reply

Your email address will not be published. Required fields are marked *